Whatsapp: +86-18963064736

Wechat: +86-18963064736

QQ: 2862752579

TM: Bonabio

Address: Block D, Century Fortune Center, High-tech Zone, Jinan City, Shandong Province, China

Copyright(c)2020  ©  Shandong Bona Biological Technology Group Co., Ltd. 鲁ICP备12034225号-5








High pressure flat membrane experimental equipment

Product Details

Product introduction:

        The high pressure flat membrane experimental equipment (TYLG-19) produced by Shandong Bona Biological Technology Group Co., Ltd. can be replaced with microfiltration membrane, ultrafiltration membrane, nanofiltration membrane, reverse osmosis membrane, seawater / brackish water desalination membrane, which is suitable for all kinds of membrane testing and research, and filtration of a small amount of materials. It is widely used in the fields of biology, pharmacy, food, chemical industry and environmental protection, and in the process experiments of concentration, separation, purification, clarification and sterilization. According to the experimental requirements, different sizes of circular or square membrane cells can be customized.

High pressure flat membrane experimental equipment TYLG-19

Technical parameters:

Minimum circulation volume: 500ml;

Number of membrane tanks: 3;

Diaphragm specification: 4.0 * 6.0CM;

Power supply: 220 V;

Working temperature: 5-55 ℃;

Material tank: 2L jacket controllable temperature;

Maximum pump power: 1500W;

Balance: measuring range 3kg, accuracy 0.1g;

Suitable pH range: 2-12 (depending on the diaphragm);

Working pressure: 0-4.0mpa;

Flow rate: 30-90l / h;

Equipment size: 630 (L) *494  (W) *452  (H) mm+721(L) *247  (W) *610  (H) mm;

Product features and process introduction:

1. The equipment is controlled by two pumps. The microfiltration ultrafiltration membrane can only start the auxiliary pump, which effectively ensures the different control of flow and pressure in high and low pressure test.

2. The design of the membrane tank is square, with special flow channel design and water distributor, which can ensure the pressure and flow at each point of the membrane are stable and consistent.

3. The membrane tank adopts parallel structure, and any one or several of them can be used for experiment. Different diaphragms can be installed and tested at the same time to ensure the consistency of feed flow and state.

4. According to the hydrodynamics, the design ensures the tangential flow and turbulence of the membrane pool, and ensures the reliability and stability of the test data.

5. It can install microfiltration membrane, ultrafiltration membrane, nanofiltration membrane and reverse osmosis membrane. It is suitable for membrane test and filtration of small amount of liquid.

6. The pump adopts pressure sensing system and frequency conversion control system, which can adjust the pressure and flow by frequency conversion, set the maximum pressure, realize automatic overpressure protection, and is absolutely safe in use.

7. Using constant pressure control system, in the test process, constant pressure can be controlled by constant pressure control system to ensure constant test pressure.

8. With automatic overpressure protection function, overpressure automatic shutdown, ensure the safety of the use process;

9. With temperature control module, over temperature automatic shutdown, to ensure the stability of materials in the experimental process; Can set high and low temperature alarm, automatic start and stop; Timing start stop function can be set;

10. The equipment is equipped with pressure and temperature sensors. With data transmission system, the device has storage function and U disk, you can click the screen to store data to U disk, copy data, the device can also be directly connected to the computer for data recording and storage.

11. Equipment power supply adopts double switch control, low voltage power supply can fully ensure the safety of equipment and personnel.

12. All stainless steel welding adopts automatic argon filling protection, single-sided welding and double-sided forming. The internal and external surface quality of the pipeline is excellent, and there is no welding point in the pipeline in contact with the material, so as to ensure the pressure resistance and corrosion resistance of the equipment. The equipment is simple to operate, clean and sanitary, safe and reliable.

Basic configuration:

Double pump control (auxiliary pump: 1 electromagnetic feed pump, main pump: 1 high pressure plunger pump), 1 prefilter, 3 SUS316L membrane tanks, 5 sets of pressure sensors, 1 set of temperature sensors, 1 set of material tank, 4 sets of pressure regulating valves, equipment support, chain clamp, pipes and their connecting parts, 1 set of overpressure automatic protection system, 1 set of overtemperature automatic protection system, 1 set of high pressure automatic protection system, 1 set of high pressure automatic protection system, 1 set of high pressure automatic protection system, 1 set of high temperature automatic protection system, 1 set of high pressure automatic protection system, 1 set of high One set of frequency conversion control system, one set of data transmission system and one set of constant voltage control system.

Bona technology advantage

1. Independent completion of a number of domestic and foreign membrane equipment project engineering, rich experience;

2. We have a group of senior engineers in membrane engineering application, with many years of technical development and engineering practice;

3. Professional technical support, door-to-door guidance for installation and debugging;

4. Perfect customer service system, regular return visit, guaranteed equipment quality;

5. The company has a service center to provide you with fast, efficient and affordable instrument maintenance services.

Corresponding parameter set not found, please add it in property template of background


Address: Block D, Century Fortune Center, High-tech Zone, Jinan City, Shandong Province

Related Products

No content information display available
Please add data record on website background.