Membrane element test system

Product introduction：

The membrane component test system produced by Shandong Bona Biological Technology Group Co., Ltd. can be replaced with microfiltration membrane, ultrafiltration membrane, nanofiltration membrane, reverse osmosis membrane, seawater / brackish water desalination membrane, which is suitable for all kinds of membrane test research, filtration separation of a small amount of materials, teaching demonstration and experimental research. It is widely used in the fields of biology, pharmacy, food, chemical industry and environmental protection, and in the process experiments of concentration, separation, purification, clarification and sterilization.

Membrane element test systemBONA-GM-18-30

Basic parameters：

Minimum circulation volume: 20L;

Working pressure: 0-15 bar;

Allowable working temperature: 5-55 ℃;

Material tank: 50L jacket;

PH: 2-12;

Pump power: 2.75kw frequency conversion control;

Module housing: SUS304;

Equipment size: 1500 (length) × 1100 (width) × 1800 (height) mm;

Description of equipment structure：

1. Module shell: one 3012, two 1812, three shells in parallel;

2. The flow range of the pump is configured according to the membrane surface flow rate of the membrane element, which can ensure that the experimental parameters selected by the equipment can be directly put into industrial production;

3. According to the fluid dynamics design, the membrane shell can fully ensure the membrane surface velocity and the stability and reliability of the test data;

4. With automatic overpressure protection function, overpressure automatic shutdown; Ensure the safety of the use process;

5. With temperature control module, over temperature automatic shutdown, to ensure the stability of materials in the experimental process; Can set high and low temperature alarm, automatic start and stop; Timing start stop function can be set;

6. It can be replaced with other types of microfiltration, ultrafiltration, nanofiltration and reverse osmosis membrane components;

7. With the parallel structure of three membrane shells, different types of membrane elements can be tested by switching valves to realize unified experiment and cleaning;

8. Rotameter: 10gpm, DN20, plexiglass; Rotameter: 3-30l / min (2 pieces) and 5-50l / min (1 piece);

9. All stainless steel welding adopts automatic argon filling protection, single-sided welding and double-sided forming. There is no welding point in the pipeline in contact with the material, so as to ensure the pressure resistance and corrosion resistance of the equipment. The internal and external surface quality of the equipment pipeline is excellent, the operation is simple, clean and sanitary, safe and reliable.

Main equipment accessories：

One feed pump, one booster pump, three SUS304 stainless steel membrane modules, four pressure sensors, one temperature sensor, one jacketed material tank, three pressure regulating valves, six flow meters, one equipment support, one main circulation system, one electrical control system, one frequency conversion control system, one over temperature automatic protection system and one over pressure automatic protection system.

Bona technology advantages:

1. Independently complete a number of membrane equipment projects at home and abroad, with rich experience;

2. Have a group of senior engineers in membrane engineering application, with many years of technical development and engineering practice;

3. Provide professional technical support, and guide the installation and debugging on site;

4. Perfect customer service system, regular return visit and guaranteed equipment quality;

5. The company has a service center to provide you with fast, efficient and affordable instrument maintenance services.