Whatsapp: +86-18963064736

Wechat: +86-18963064736

QQ: 2862752579

TM: Bonabio

Address: Block D, Century Fortune Center, High-tech Zone, Jinan City, Shandong Province, China

Copyright(c)2020  ©  Shandong Bona Biological Technology Group Co., Ltd. 鲁ICP备12034225号-5








Ceramic membrane pilot test equipment

Product Details

Ceramic membrane pilot test equipment (BNCM7-3-M)
product description:
The ceramic membrane pilot test equipment (BNCM3-7-M) can be replaced with ceramic membrane elements (UF, MF) with different pore diameters. It is widely used in biological, pharmaceutical, food, chemical, environmental protection and other fields for the separation of materials and liquids. Process experiments such as purification, clarification and sterilization. It can replace the traditional process of plate and frame filtration, centrifugal separation, solvent extraction, natural sedimentation, diatomite filtration, etc. It can reduce the amount of activated carbon used in decolorization, improve the adsorption efficiency of resin adsorption, and extend the regeneration cycle of ion exchange resin . The ceramic membrane filtration and separation technology has the advantages of fast product filtration, high yield, good quality, 


Ceramic membrane pilot test equipment (BNCM7-3-M)

Equipment related parameters:
1. Adapt to working temperature: 5-80℃;
2. Material tank: 150L (can be customized);
3. Minimum circulation volume: 50L;
4. Adapt to the range of PH value: 0-14;
5. Filtration rate: 100-600L/H (depending on material conditions);
6. Single-core filter area: 0.286 M2;
7. The flow velocity of the membrane surface on the circulating side: Vf=3-4m/s;
8. Number of membrane modules: 3;
9. Membrane element size: 1200mm (length) ф30 mm (inner diameter);
10. Channel: 19 channels-ф4mm, multi-channel cylindrical;
11. Operating pressure: 0-0.6Mpa;
12. Power: 7.5KW;
13. Model of optional membrane element:
Ceramic microfiltration membrane elements: 50nm, 100nm, 200nm, 400nm, 600nm, 800nm, 1um, 1.2um, 1.5um, 2um
Ceramic ultrafiltration membrane elements: 30nm (200KD), 20nm (150KD), 12nm (100KD)
10nm (20KD), 5nm (8000D), 3nm (2000D)
14. Dimensions: 1500 (length) × 900 (width) × 1800 (height) mm.

Product features and process introduction:
1. The system adopts an integrated structure design and a skid-mounted structure. The surface of the equipment has no sanitary corners and meets GMP requirements;
2. The system is equipped with a security filter to avoid damage to the membrane core due to materials mixed with foreign matter;
3. Set up a heat exchanger to control the temperature of the materials in the system through external circulating cooling water;
4. Equipped with pressure, temperature and other instruments, which can realize online monitoring, system protection and alarm.
5. The system is equipped with automatic protection devices, equipped with an emergency stop button, the equipment will stop immediately when pressed, and the equipment will enter the standby state when reset;
6. The film inlet pressure is higher than the set value (parameters can be adjusted and set, such as 0.5MPa), the system will be protected and automatically shut down and alarm;
7. When the material temperature is higher than the upper limit setting value or lower than the lower limit setting value (upper and lower limit parameters can be adjusted and set), the system is protected and automatically shuts down and alarms.
Device Configuration:
One circulating pump, 3 membrane modules, 21 ceramic membrane elements, one set of recoil system, one circulating tank, one heat exchanger, one clear liquid pipeline, one concentrated liquid pipeline, and basic electrical control cabinet One set, equipped with temperature protection system and pressure protection system, equipment supports, pipelines, valves and several connecting parts.
Bona technical advantages:
1. Independently completed a number of domestic and foreign membrane equipment projects, with rich experience;
2. Have a group of senior engineers in membrane engineering application with many years of technology development and engineering practice;
3. Professional technical support can be provided on-site to guide installation and commissioning;
4. Complete customer service system, regular return visits, and equipment quality is guaranteed;
5. The company has a service center to provide you with fast, efficient and affordable instrument maintenance services.

Corresponding parameter set not found, please add it in property template of background


Address: Block D, Century Fortune Center, High-tech Zone, Jinan City, Shandong Province

Related Products