Whatsapp: +86-18963064736

Wechat: +86-18963064736

QQ: 2862752579

TM: Bonabio

Address: Block D, Century Fortune Center, High-tech Zone, Jinan City, Shandong Province, China

Copyright(c)2020  ©  Shandong Bona Biological Technology Group Co., Ltd. 鲁ICP备12034225号-5








High-pressure flat membrane experimental equipment

Product Details

High-pressure flat membrane experimental equipment (TYLG-19)
product description:
The high-pressure flat membrane experimental equipment (TYLG-19) produced by Shandong Bona Biological Technology Group Co., Ltd. can be replaced with microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, reverse osmosis membranes, seawater/britterwater desalination membranes, and is suitable for all types Membrane test research, filtration of small amounts of materials. It is widely used in the fields of biology, pharmacy, food, chemical industry, environmental protection, etc. It is used for process experiments such as concentration, separation, purification, clarification, and sterilization of liquid materials. Circular or square membrane tanks of different sizes can be customized according to experimental requirements.

High-pressure flat membrane experimental equipment (TYLG-19)

Technical Parameters:
1. Minimum circulation volume: 0.5L
2. Allowable working temperature: 5-55℃
3. PH scope of application: 2-12
4. Working pressure: 0-6.5MPa
5. Material tank: 1.1L (with jacket temperature controllable)
6. Flow rate: 30-90L/H
7. Equipment size: 640 (length) x440 (width) x535 (height) mm
Product features and process introduction:
1. The internal and external surfaces of the pipeline are of high quality, and the whole set of equipment materials contact the pipeline without any welding points, ensuring the pressure and corrosion resistance of the equipment, simple operation, clean and sanitary, safe and reliable;
2. The equipment is controlled by dual pumps, and only the auxiliary pump can be turned on for the microfiltration and ultrafiltration membranes, which effectively guarantees the different control of flow and pressure for high and low pressure tests;
3. The pump adopts a pressure sensing system and a frequency conversion control system, which can adjust the pressure and flow rate by frequency conversion, and set the maximum pressure to realize automatic protection against overpressure. The use process is absolutely safe;
4. The membrane tank is designed with two circles, 120 degrees of opening, and a square structure. It is a special flow channel design to ensure that the pressure and flow rate at each point of the diaphragm are stable and consistent;
5. Design based on fluid dynamics to ensure the tangential flow and turbulence of the membrane pool and ensure the reliability and stability of the test data;
6. Microfiltration membranes, ultrafiltration membranes, nanofiltration membranes, and reverse osmosis membranes can be installed, which are suitable for membrane testing and research and filtration experiments of a small amount of liquid material;
7. The jacketed material tank can be connected to high and low temperature circulation devices for temperature control;
8. The equipment is equipped with a digital pressure sensor with an accuracy of 0.4% FS, which can accurately record and test high and low pressure data to ensure the accuracy of the data and overcome the shortcomings of low accuracy of mechanical pressure gauges;
9. The equipment can set pressure, and realize automatic constant pressure control through the constant pressure control system to prevent the equipment from automatically boosting pressure during the test;
10. The equipment pressure and temperature adopt digital display, and the sensor value adopts the screen display mode, which can be displayed in a centralized manner. It can be uploaded to the computer as needed to record the data during the test;
11. With over-temperature automatic protection system, over-temperature automatic alarm and shutdown;
12. The membrane tank adopts a parallel structure, and any one or several of them can be used for experiments, and different membranes can be installed at the same time for simultaneous testing to ensure the consistency of the feed flow and state.
Optional diaphragm model:
Microfiltration membrane elements: 0.05um, 0.1um, 0.2um, 0.3um, 0.45um

Ultrafiltration membrane elements: 1000D, 2000D, 3000D, 5000D, 8000D, 10KD, 20KD, 30KD, 50KD, 70KD, 100KD, 300KD, 500KD, 800KD

Nanofiltration membrane elements: 100D, 150D, 200D, 300D, 500D, 600D, 800D

Reverse osmosis components: RO1, RO2, RO3, RO4, RO5, RO6, RO7, SW30, BW30
Device Configuration:
Double pump control (auxiliary pump: 1 electromagnetic feed pump, main pump: 1 high-pressure plunger pump), 3 SUS316L membrane tanks, 5 pressure sensors, 4 pressure regulating valves, 1 material tank, 1 rack Sets, one set of overpressure control system, one set of over-temperature automatic protection system, one set of frequency conversion digital display control system, one set of constant pressure control system, several pipes and their connecting parts.

Bona technical advantages:
1. Independently complete a number of domestic and foreign membrane equipment projects with rich experience;
2. Have a group of senior engineers in membrane engineering application with many years of technology development and engineering practice;
3. Professional technical support can be provided, and installation and debugging can be guided on site;
4. Perfect customer service system, regular return visits, equipment quality is guaranteed;
5. The company has a service center to provide you with fast, efficient and affordable instrument maintenance services.

Corresponding parameter set not found, please add it in property template of background


Address: Block D, Century Fortune Center, High-tech Zone, Jinan City, Shandong Province

Related Products