High-pressure flat membrane experimental equipment (TYLG-19R)

Product introduction:

The High-pressure flat membrane experimental equipment (TYLG-19R) adopt cross flow technique. Feed flow at a high speed on the surface of the organic membrane. And provide a pressure, so the small molecules can pass through the membrane vertically, and the trapped macromolecular would be flushed away. the machine produced by Shandong Bona Biological Technology Group Co.,Ltd. can be replaced with microfiltration membrane, ultrafiltration membrane, nanofiltration membrane, reverse osmosis membrane and seawater water desalination membrane, which is suitable for the testing and research of all kinds of membranes and the filtration of a small amount of materials. It is widely used in biology, pharmacy, food, chemical industry, environmental protection and other fields. It is used for process experiments such as concentration, separation, purification, clarification, sterilization and so on. Circular or square test cells of different sizes can be customized according to experimental requirements.

High-pressure flat membrane experimental equipment (TYLG-19R)

Technical parameters:
Minimum circulation volume: 500ml
Test Cell: 3Pcs
Flat membrane size: diameter 5.3cm
Working temperature: 5-55℃
Feed tank: 5L (jacketed and temperature controllable)
Total Power: 1500W
Ph: 2-12 (depens on the flat membrane used)
Working pressure: 0-7.0MPa
Equipment size: 700 (L) x 490 (W) x 550 (H) mm

Product features and process introduction:
1. The membrane test cell is Circular shape,120 degree opening, with special channel design and water distributor, which can ensure that the pressure and flow at each point of the diaphragm are stable and consistent.

2. The membrane test cells adopt parallel structure to ensure the consistency of feed flow and state, and any one or several of them can be used for experiments. Different flat membrane can be installed at the same time and tested at the same time.

3. It is designed according to the fluid dynamics to ensure the tangential flow and turbulence of the membrane tank and the reliability and stability of the test data.
4. Can be replaced with different MF / UF / NF / RO membrane elements. It is suitable for membrane test and filtration experiment of a small amount of liquid.

5. The pump adopts a pressure sensing system and a frequency conversion control system, which can adjust the pressure and flow by frequency conversion, and can set the maximum pressure to realize automatic overpressure protection, and makes the operation process absolutely safe.

6. Adopt constant pressure control system. Can ensure the constant test pressure in the test process.

7. With automatic overpressure protect function, , the machine will shutdown automatically if the pressure over the range. It can ensure the safety of using. 

8. With Temperature control system, the machine will shutdown automatically if the temperature over the range. It can ensure the feed temperature stable. 
Low temperature and high temperature alarm, automatic start and stop, set time start and stop functions can be set.

9. The equipment is equipped with pressure and temperature sensors. The machine has data transmission and storage function. Can click the screen to store data to USB disk and transfer data. The device can also be directly connected to the computer for data recording and storage.

10. Power supply adopt double switch, and low working voltage. which can fully guarantee the safety of the equipment and personnel. 

11. All stainless steel adopt automatic argon arc welding, single side welding and double side forming, without welding points in the pipes contacted with solution to ensure the pressure and corrosion resistance of the equipment.Makes the machine is easy to operate, clean, safe and reliable.

Basic configuration:
Wanner feed pump 1 set, Prefilter 1set, SUS316L stainless steel test cells 3 Pcs, Pressure sensors 4 Pcs, Temperature sensors 1 Pcs, Jaketed feed tank 1 Pcs, Pressure regulating valve 4 Pcs, Automatic overpressure protect system 1 set, Automatic overtemperature protect system 1 set, frequency conversion control system 1 set, data transmission system 1set, constant pressue control system 1 set, equipment frame, pipes, connections etc. 

Advantage of BONA technology: 
1. We have complete many membrane system projects in China and abroad, with rich experience in different applications.
2. We have a group of senior engineers in membrane filtration technology and application, with many years of technology delelopment and engineering practice. 
3. Professional technical support. 
4. Perfect customer service system, regular return visits, and guaranteed quality. 
5. We have service center to provide you with fast, efficient and affordable instrument maintenance services.